Skip navigation.

Snow CCI project

Summary

Seasonal snow cover is the largest single component of the cryopshere, covering 50% of the northern hemisphere’s land surface during mid winter, and is an important component of the climate system.

Seasonal snow cover is a crucial and challenging research issue in climate analysis and modelling. It influences energy, moisture and gas fluxes between the land surface and atmosphere; its high reflectivity, or albedo, provides a significant feedback effect in a warming climate; and its sensitivity to precipitation and temperature regimes makes it widely recognised as a fundamental indicator of climate variability and change. Snow is also a major, if not dominant, freshwater source in many alpine, high- and mid-latitude regions an important contribution to the global water cycle.

The Snow_cci project aims to contribute to the understanding of Snow  in the climate system by generating consistent, high quality long-term data sets that meet the requirements of the Global Climate Observing System (GCOS).


Objective

The ultimate objective of Snow_cci is to generate homogenized long-time series of daily global snow extent maps from optical satellite data (Figure 1) and daily global snow water equivalent products from passive microwave satellite data (Figure 2). 

: Prototype of global fractional snow cover (FSC) product from Terra MODIS data from 18-22 March 2017 (generated by ENVEO, 2017).

Figure 1: Prototype of global fractional snow cover (FSC) product from Terra MODIS data from 18-22 March 2017 (generated by ENVEO, 2017).

Demonstration product of snow water equivalent (SWE) on 19 November 2016 over the northern hemisphere from passive microwave data (generated by FMI, 2017).

Figure 2: Demonstration product of snow water equivalent (SWE) on 19 November 2016 over the northern hemisphere from passive microwave data (generated by FMI, 2017).

The goal of the Snow_cci project is to set up reliable, fully validated processing lines for key parameters of the global seasonal snow pack, to be used for re-processing time series of archived satellite data, for processing current satellite observations, and to prepare for exploitation of future satellite data acquisitions.

The Snow_cci will address the primary snow parameters defined by Global Climate Observing System (GCOS), which can be derived from archived and current EO data, namely:

  • snow cover area extent (SE)
  • snow water equivalent (snow mass; SWE)

The third parameter identified by GCOS, snow depth, cannot be observed directly by archived or current EO data and is not taken into account in this project. However, it can be derived directly from SWE if snow density is known or estimated. 


Latest news 

The first user workshop of the Snow_cci project will be held on Thursday, 29 November 2018, 09:00 - 17:00, at the Zentralanstalt für Meteorologie und Geodynamik (ZAMG) in Vienna, Austria.

 

Register here for the snow_cci user workshop

 

Participation is free of charge. Registration is open until 20 November 2018.

Submission of Title for Presentation:

Short presentations of your application in climate research for which you anticipate using snow_cci products are welcome.
Please provide the title of your presentation by 31 October 2018 as part of the online registration at http://snow-cci.enveo.at/registration.html

Further Information:

For further information or registration, please visit the User Workshop Website.

Download here the official snow_cci user workshop announcement (PDF).

 

  • Kicking off of the project [26-27/09/2018]

The Snow_cci project was successfully kicked off on 26/27 September 2018 in Innsbruck, Austria.

 

 

 

 

 

 

 

 

 

 

 

Photo: The snow_cci project team at the Kickoff Meeting on 27 September 2018 in Innsbruck, Austria.

From left to right: Gabriele Schwaizer, Carlo Marin, Claudia Notarnicola, Kari Luojus, Alexander Jacob, Anna Maria Trofaier, Ursula Fasching, Sari Metsämäki, Johanna Nemec, Joanna Ossowska, Gerhard Krinner, Lawrence Mudryk, David Gustafsson, Thomas Nagler, Kathrin Naegeli, Cecile Menard, Stefan Wunderle, Arnt-Børre Salberg, Rune Solberg


About the project

The technical component in the first phase of the Snow_cci project will focus on development and implementation of methods and processing systems to generate consistent multi-sensor time series of global snow parameters, namely daily fractional snow cover and snow water equivalent, from data of ESA and third-party satellites. These products will contribute to the determination of the long-term trends in seasonal snow since beginning of the early 1980s, currently still a matter of debate due to various inconsistencies between different snow cover data sets, as shown in the ESA QA4EO project SnowPEx.

The snow extent product will have a spatial resolution of 1 km and daily global coverage (excluding ice sheets), as illustrated in Figure 1. We will develop and implement a consistent system to generate products of snow on the surface (viewable snow) and snow on the surface corrected for any forest masking (snow on ground). Both products will be expressed as fractional snow per pixel and will be derived from medium resolution optical satellite data. The multisensory time series, starting from the beginning of the 1980s to present day, will include data from AVHRR-2/3, ATSR-2, AATSR, MODIS, Sentinel-3A/B SLSTR and Spot/Proba-V Vegetation. For each product the uncertainty will be estimated for each pixel taking spectral capabilities, calibration and geolocation accuracy into account. A key aspect of the long time series of daily products will be cross-sensor consistency of the products. Aggregation methods will be implemented to generate weekly, bi-weekly, monthly and seasonal snow extent products, following the requests of the science community.

The snow water equivalent production system will be built on the GlobSnow SWE production system (Figure 2) and will be further developed by improving various aspects of the processing chain, including time variable snow density, influence of land cover and implementation of techniques for enhancement of brightness temperature resolution. The daily global time series will be based on SMMR and SSM/I data (from a number of DMSP F-series satellites) starting in 1978 to present day. A key aspect will also be the synergy between the daily time series of snow extent and SWE products, with the aim to get a consistent cross parameter data set.

The snow extent and snow water equivalent products will be made available to the Climate Research Group (CRG) and the wider scientific community, requesting feedback on the quality of the products to further improve the ECV snow products.

Involvement and communication with the international climate research community will be coordinated in two ways, through the User Workshops on user requirements and product specifications and through the following case study projects led by members of the CRG: 

  • Trend analysis of northern hemispheric or global Snow Extent and Snow Water Equivalent, carried out by ECCC
  • Assessment of output from coordinated model experiments from the ongoing ESM-SnowMIP, LS3MIP and CMIP6 model intercomparison against the Snow_cci products, carried out by CNRS
  • Extension of the point scale evaluation of historical ESM-SnowMIP simulations with Snow_cci data, carried out by University of Edinburgh
  • Utilization of Snow_cci products to investigate the role of snow cover changes for the observed changes in the hydrological regime over the large pan-arctic drainage basin of the Arctic Ocean, carried out by SMHI.

The project team

The Snow_cci team consists of 11 scientific and industrial partners from 9 different countries. The team is organized as follows:

  • Science lead – Dr. Thomas Nagler, ENVEO (Environmental Earth Observation IT GmbH), Austria.
  • Project Management - Dr. Gabriele Schwaizer, ENVEO (Environmental Earth Observation IT GmbH), Austria.
  • Earth Observation Science Team – led by Dr. Stefan Wunderle, University of Berne, Switzerland.
  • Validation Team – led by Dr. Carlo Marin, EURAC, Italy.
  • System Engineering Team – led by Dr. Andreas Wiesmann, GAMMA Remote Sensing, Switzerland.
  • Climate Research Group – led by Dr. Chris Derksen, Environment and Climate Change Canada (ECCC), Canada.

ENVEO (Environmental Earth Observation IT GmbH), Austria, is the project leader, responsible for the scientific coordination and the technical project management of the project, relations with ESA and communications with relevant scientific communities. ENVEO is also leading the algorithm development activities and is contributing to the generation of snow extent products.

Environment and Climate Change Canada (ECCC), Canada, is leading the Climate Research Group. Further, ECCC is together with FMI responsible for the algorithm development and generation of snow water equivalent products.

EURAC Research, Italy, has the lead of the Validation Team and is responsible for independent validation activities of all snow products generated in the Snow_cci project.

Finnish Meteorological Institute (FMI), Finland, is together with ECCC responsible for the algorithm development and is leading the generation of snow water equivalent products.

GAMMA Remote Sensing AG (GAMMA), Switzerland, is responsible for all system engineering activities in the project and is contributing to the generation of snow extent products.

Norwegian Computing Centre (NR), Norway, is responsible for the end-2-end uncertainty characterisation of the snow products as well as for the generation of the ECV snow products. Further, NR is contributing to the algorithm development for snow extent products.

University of Berne (UBE), Switzerland, has the lead of the EO Science Team and is responsible for the requirements management. Further, UBE is contributing to algorithm development and the generation of snow extent products and to the validation of snow water equivalent products.

Finnish Environment Institute (SYKE), Finland, is contributing to the algorithm development for snow extent product.

The Climate Research Group, under the lead of Dr. Chris Derksen (ECCC) are external experts who will assess the user requirements and define the specifications for snow products to be generated within the Snow_cci project. The following members of the Climate Research Group will each perform a use case study to assess the impact of the ECV snow products for climate monitoring and research: 

Dr. Patricia de Rosnay from the European Centre for Medium-Range Weather Forecasts (ECMWF) will support the CRG as external expert.

 


Contact us / support

Please use the following emails to contact the Snow_cci team:

  • General and technical support: Gabriele.schwaizer[at]enveo.at
  • Scientific leader: Thomas.nagler[at]enveo.at
  • Project manager: Gabriele.schwaizer[at]enveo.at
  • ESA technical officer: Anna.Maria.Trofaier[at]esa.int